15
ENGLISH
EN
• Remove the plug, using a screwdriver if neces-
sary Fig. 12.
• Insert it inside the seat specially created in the
plug and prise, pushing the screwdriver down-
ward and the plug upward.
• Repeat the same operation also for the other
plug.
• Fit the plugs for wheels larger than 28” (E),
using a rubber hammer if necessary (Fig. 13).
• Reposition the tubes with respective screws
(Fig. 10 and Fig. 11).
FITTING THE BICYCLE
• Make sure the quick release of the bicycle rear
wheel is properly fixed.
• Turn the lever (F) to the “open” position (fig. 14).
• Put the bicycle in position, inserting the left end
of the rear quick release in the left bushing (fig.
15). For safer clamping of the bicycle on the stand,
make sure the lever of the quick release is hori-
zontal (fig. 16).
parallel
I
11
12
16
13
14
15
