www.ELITETOOLS.co
Keep Working
• Do not allow body contact, including your fingers and hands with a cutting disc while it is running to prevent
serious injury.
• Always secure the blade cover and safety cover to the cutting blade. Without the wheel cover and safety
cover, rotation of the cutting disc or fragments of the cutting disc can cause serious injury.
• Make sure the switch is off before connecting the power tool. Connecting tools when their switches are on
would result in unexpected bit rotation and serious injury.
• Always wear protective glasses at work.
always wear a dust mask, some residues such as dust caused by cutting the disc contain chemicals known
to cause cancer, birth defects or other diseases.
• Damage to the cable must be replaced or repaired immediately. Damage to the cable can cause electric
shock. Use only authorized cutting blades at all times.
• Use cutting discs with 4,000 RPM (revolutions per minute) allowable angular velocity. Using the cutting
disc with a peripheral speed lower than that allowed could damage them and fragments of the cutting disc
could cause injuries.
• Never use a broken or transformed cutting disc. Using broken or transformed cutting discs may in the
future cause damage to them while they are rotating, and fragments of the cutting disc may cause injury.
• Before changing the blade or brushes and making other adjustments to the cutting blade, always discon-
nect the plug from its power source. Otherwise, you could experience electric shock or injury.
• Never use the saw blade with the cutting machine. The cutting machine has a higher speed and may
damage the blade and cause injury.
CAUTION
• Never subject the cutting disc to unnecessary pressure. This can damage the cutting disc while it is spin-
ning and fragments can cause serious injury.
• Never polish workpieces with the surface side of the cutting disc. The cutting disc is thin and weak on
impact. Ground workpieces with the surface side of the cutting blade can damage the blade while it is rota-
ting, and fragments of the cutting blade can cause injury.
• Always keep people away from your work area while you are operating the machine. Sparks or fragments
of work pieces that are generated when you operate them can cause serious injuries.
• Never use damaged parts to install a cutting disc such as threads, nuts, etc. Using damaged parts causes
cracks or other damage to the disc cut, which can cause injury or injury.
3
Summary of Contents for CS1425
Page 33: ...www ELITETOOLS co Keep Working...
Page 34: ......
