background image

www.ELITETOOLS.co

 Keep Working

13. Keep your tools neat.

Keep your tools clean and sharp, with this you can work your tools safely and efficiently. Follow maintenan-

ce rules and replacement instructions. Periodically examine cables and plugs; This should be reviewed by 

qualified repair personnel. Periodically check cables and replace damaged cables appropriately and quic-

kly. Keep the handles of power tools dry and free from oil and grease.

14. Keep the electrical plug disconnected.

Always disconnect the plug from the power tool before making any adjustments to them, before changing 

accessories (such as drills, saw blades, bits, cutters) or before storing them.

15. Remove adjusting keys.

Check that the keys have been removed from the tools before turning them on.

16. Avoid a starting accident.

Loading your tools with your fingers on the switch or plugging in tools with the switch turned on can cause 

accidental starting damage before connecting a tool make sure the switch is OFF.

17. Use the cord for shutdown when operating tools outdoors.

When using an outdoor power tool, use an outdoor use cord.

The instructions in this user guide included critical information for safety use. Failure to comply to the letter 

can cause serious injury, serious injury to personnel, or even loss of life.

WARNING and CAUTION signs

These are used in this manual for your safety and protection. Please study them and learn their meaning.

To prevent possible accidents during the use and handling of the tool, there are precautions used in this 

manual. These warnings and precautions cannot cover all possible accidents. Be very careful during tool 

operation and handling Read and understand all instructions.
SPECIAL SAFETY RULES
Be very careful in dangerous situations with special conditions.
WARNING
• Do not expose power tools to rain or other moisture. This can cause serious injury or even loss of life from 

electric shock.

WARNING

Failure to comply with 

this manual can lead to 

serious injury or loss of 

life.

CAUTION

Failure to follow this 

manual can lead to 

serious injuries

or loss of life.

CAUTION

Failure to comply with 

this manual may result in 

malfunction or irreparable 

problem.

2

Summary of Contents for CS1425



































Reviews: