9
EN
A
N°3 Side members
B
N°1 Longitudinal member with resistance
C
N°4 Rectangular covers
D
N°2 Round covers
E
N°1 Drive belt
F
N°1 Front roller
G
N°1 Middle roller
H
N°1 Rear roller
I
N°1 Power adapter
N°1 Allen key
NAME AND LIST OF COMPONENTS
ASSEMBLY
Your Arion Digital Smart B+ roller should arrive fully
assembled, checked and ready for use.
DISTANCE ADJUSTMENT OF ARION DIGITAL
SMART B+
Before starting to use your Arion Digital Smart B+ it is
necessary to adjust the centre distance of the rollers to
make them compatible with your bicycle’s wheelbase.
This adjustment must be carried out as follows:
1) Measure the distance between the centres of the whe-
els of the bicycle to be used on the Arion Digital Smart B+
(Fig. 2). We will call this dimension “X”.
2) The distance from the intermediate point between the
two rear rollers to the middle of the Arion Digital Smart B+
front roller, which we will call “Y” (Fig. 3), must match or be
as near as possible to dimension “X” . The axle of the Arion
Digital Smart B+ front roller must be positioned in the hole
of the Arion Digital Smart B+ frame whose measurement
given on the graduated scale is closest to dimension “X”
(Fig. 4).
ATTENTION: dimension “Y” must be equal to or slightly
greater than “X”. The rollers can be adjusted to adapt
them to bicycles whose wheelbase is 944-1124 mm
(37 to 44 inches).
3) To change Y it is necessary to shift the front roller F).
device.
Please contact the app / software / device manufacturer to
verify compatibility with one or more of these protocols.
ANT+™
ANT+™ FE-C: this protocol allows the software / app /
device to receive training data and adjust hometrainer
resistance. This protocol permits total interaction with the
hometrainer.
ANT+™ Speed&Cadence*: this protocol transmits home-
trainer speed and cadence data. Although more common
than the ANT+™ FE-C, it does not allow interaction and
the app/software/ device.
ANT+™ Power: this protocol transmits the cyclist’s power
output data. Also much more common than the
ANT+™ FE-C, but this protocol does not allow interaction
between the hometrainer and the app/software/device.
With the exception of smartphones that feature integrated
ANT+™ connectivity, a USB dongle is necessary to con-
nect via the ANT+™ protocol.
If iOS devices are used, a specific dongle is needed (not
included).
A complete list of ANT+™ compatible devices is available
at: http://www.thisisant.com/directory/
BLUETOOTH SMART
Fitness Machine - Indoor Bike service This protocol sends
training data to compatible software / app / device and
adjusts resistance on the hometrainer. This protocol offers
total interaction with the hometrainer.
Speed&Cadence Service*: this protocol transmits home-
trainer speed and cadence data, but does not allow inte-
raction between software / app / device and the hometrai-
ner.
Power Service: this protocol transmits the cyclist’s power
output data, but will it also not allow interaction between
software / app / device and the hometrainer. In most cases,
smartphones and tablets already
feature Bluetooth Smart connectivity, so there is no need
for additional components to communicate
with the Arion Digital Smart B+. However, the more outda-
ted devices might not be compatible. Please consult your
app provider to make sure that it’s Bluetooth Smart com-
patible.
NOTE: When the hometrainer is connected to the device by
a Bluetooth Smart protocol, it cannot be connected to
additional devices. This is a restriction of the Bluetooth
Smart protocol itself.
* Attention: if the program / app / device uses the Speed&Cadence
protocol for speed reception, the circumference value to be set
depends on the roller.
In the Arion Digital Smart B+, the circumference to be set is 67
mm.