11
EN
of hands when closing the roller, to avoid squashing them
between the two side members. To close the frame, place
hands at the ends of the side members (Fig. 9).
- Therefore avoid placing hands in such a way that can
become squashed between the side members (Fig. 10).
- To facilitate carrying, it is advisable to hold it by the spe-
cial grips located at the hinges (Fig. 11).
CARE AND MAINTENANCE
1) Prolonged exposure to direct sunlight can cause defor-
mation of the technopolymer rollers. Do not use or keep the
rollers in places where they are exposed to direct sunlight.
2) Always clean the rollers after use. Only use a damp
cloth. Do not use solvents or harsh detergents.
3) If the Arion Digital Smart B+ is not going to be used for
a prolonged period, release the drive belt, bringing it out of
its seat, or close it, otherwise the belt’s tension could cause
early loss of transmission efficiency.
4) The coupled bearings on the roller do not require lubri-
cation and are practically maintenance-free.
5) Periodically check the roller clamping screws, make
sure that they are still tight but not so tight as to damage
the plastic frame.
6) Do not leave the charger connected to the roller.
7) In case of wear or breakage of the drive belt, replace it
by proceeding as follows:
A) Remove the rectangular covers (C) from both front
longitudinal members (with aid of a screwdriver if necessa-
ry), and the screws and washers from the front roller on
both sides, using the Allen key I) supplied.
B) Undo the fixing screw (Fig. 12).
C) Undo the fixing screw located on the longitudinal mem-
ber on the side opposite the magnetic resistance of the
middle roller G (Fig. 13).
D) Replace the belt, refit the rollers in their correct seats
and secure all the screws again.
E) Position the rectangular cover on its seat.
8) Drive belts and other spare parts for the Arion Digital
Smart B+ are available from you local Elite dealer.
ATTENTION
- Keep people, children and animals away from the roller
during use, since the moving and rotating parts of the roller
and the bicycle can cause damage in case of contact.
- Before starting training, position the trainer in a dry place,
away from potentially hazardous objects (furniture, tables,
chairs, etc.) in order to avoid any risk of inadvertent or
accidental contact with them.
- The roller is designed for use by a single rider.
- Do not use the bicycle brakes to stop. Rest a foot on the
Arion Digital Smart B+ frame and allow the bicycle to come
to a stop.
- Do not store the Arion Digital Smart B+ in wet or damp
places. The electronic components could become dama-
ged.
- The Arion Digital Smart B+ may not comply with the EC
directives if the power adapter supplied is not used.
Technical assistance:
Phone 0039 049 5940044
e-mail: [email protected]
1) WITHIN THE EUROPEAN UNION
This product conforms with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE.
The crossed bin symbol given on the equipment or on the packaging indicates that at the end of its service life the product
must be collected separately from other waste.
Therefore at the end of its useful life the user must take the equipment to an appropriate centre for the differentiated collection of
electronic and electrotechnical waste, or return it to the dealer when purchasing a new product of equivalent type.
Adequate differentiated collection for subsequent sending of the scrapped equipment to recycling, treatment and environmentally-
friendly disposal can help prevent possible negative consequences for the environment and the health of people and favours the
resume and/or recycling of the materials from which the equipment is made.
Improper disposal of the product by the user could involve penalties as specified by the regulations in force.
2) IN NON-EU COUNTRIES
If you want to dispose of this product, please contact your local authorities and ask them what disposal method applies.
INFORMATION ON PRODUCT DISPOSAL
