10
EN
4) Fold the Arion Digital Smart B+ until the drive belt E)
slackens.
5) Loosen the drive belt E), making it come off the respec-
tive front and rear guides.
6) Unfold the Arion Digital Smart B+ back into the open
position.
7) Remove the rectangular covers C) from both front lon-
gitudinal members (with aid of a screwdriver if necessary),
and the screws and washers from the front roller on both
sides, using the allen key supplied (Fig. 5 and Fig. 6).
8) Pull the roller out from its original position.
9) Position the roller in the appropriate seat in the holes in
the frame, so that X matches Y.
10) Refit the screws and the washers in the special holes,
but do not tighten them down.
11) Close the Arion Digital Smart B+, position the drive belt
E) on the guide of the front roller F) and middle roller G).
12) Unfold the Arion Digital Smart B+ into open position
again.
13) Check the position of the front roller F), putting your
bicycle on the rollers and checking that the axle for the
front wheel sits directly above the front roller.
14) Once the front roller F) has been positioned, tighten the
screws without applying too much pressure which could
twist the A) side Frames.
15) Close the sides with the rectangular covers C). The
Arion Digital Smart B+ is now ready to use.
NOTES
• Attention: integrated wireless systems that work
on
the same frequency band can interfere with the data
transmission of the Arion Digital Smart B+. In this case,
deactivate them.
• Do not leave the roller and console exposed to direct
sunlight or in particularly humid places for prolonged
periods when not being used.
• Never use chemical detergents (petrol or thinners) on
any part of the Arion Digital Smart B+.
USE
- Plug the power adapter I) into a wall outlet and the con-
nector into the resistance unit (Fig. 7 and Fig. 8).
- Start pedalling.
TROUBLESHOOTING
The cadence value is not accurate:
the algorithm that calculates cadence without a sensor can
sometimes vary in accuracy. This might happen when
training with a high pedaling cadence at a low resistance
level.
If the hometrainer does not connect to the app:
The hometrainer needs to be properly powered up to work
and it needs to connect to a device within 15 minutes,
otherwise it will automatically enter its energy saving
phase. Start pedaling or unplug it and plug it in again to
reactivate it, and then connect to a device within 15 minu-
tes.
ADVICE ON USING YOUR ARION DIGITAL
SMART B+
1) The rollers work best with tyre that has a smooth tread.
If using a mountain bike, to reduce noise and increase
stability change the tyre for one with a slick tread.
2) For beginners, position the rollers in an entrance hall, in
a doorway or near a stable object, in order to have a sup-
port while acquiring the necessary balance.
3) Make sure the Arion Digital Smart B+ rests on a flat,
stable surface.
4) Start pedalling and look ahead, like on the road. Even if
you would instinctively tend to look at the front wheel, you
will keep balance better and pedal “in a straight line” if you
concentrate on an object located 2.5 – 4 metres (10-15
feet) in front of you.
5) If you start leaning or shift to the side of the drums,
correct your position with very light steering movements. If
you steer to much you will lose balance or end up over the
side of the rollers.
6) Keeping a fast and smooth pedalling style will help you
stay balanced on the rollers, thanks to the gyroscopic
effect of the wheels.
7) At first, pedalling on the rollers will give you a feeling of
instability, and moving the handlebar too abruptly or pedal-
ling heavily can make you lose control. The big advantage
of the rollers, compared to standard training tools, is that
the rollers teach you to reduce the movement of the upper
part of your body and maintain a steady pedalling pace.
END USE
- For carrying, or to save space when not using the roller,
it is advisable close the frame. Pay attention to the position
