Linux DVR System
4.5.
OSD Setup
OSD sets whether or not to display the information such as camera ID and sensor,
Pantilt camera setting, storage status, etc. on displaying screen.
①
Move cursor to OSD among general setup menu. Use ▲/▼button for the move of
cursor. When OSD menu is selected, yellow light is lit.
②
When pressing ▶button among move buttons, yellow light is lit around the rim of
setup window that show present setup value at the right side of concerned menu,
and ON/OFF is selectable.
③ ON/OFF may be changed using ▲/▼button among
Direction Movement buttons.
④ When setup is completed, move cursor to selection window by pressing ENTER
button. At this time, yellow light around selection window goes out and the cursor
also disappears.
LeadTech
59