ELiSS LD-1600 User Manual Download

Page: 34 / 124

Linux DVR System

3.2.7. Explanation of Regeneration Function Button

This is to explain on regeneration function button located on the front side of ELiSS.

The moving function in the 5 minutes unit with 2 Direction Movement buttons is

※

possible only within 1 hour.

①

Regenerates in the right direction at fast speed.

②

Regenerates in the right direction at normal

speed. Press once more to stop this temporarily.

③

Regenerates in the right direction at fast speed.

If you press this during its being static,

regeneration is made by one frame.

④

Converts this to Overlay Mode.

⑤

Moves to 5 minutes before the time search is

presently being made.

⑥

Moves to 5 minutes after the time search is

presently being made.

⑦

Increases (+) camera channel shown on the

screen.

⑧

Decreases (-) camera channel shown on the

screen.

⑤ ⑦ ⑧ ⑥

① ② ③ ④

LeadTech

３４

Summary of Contents for LD-1600





























































































































Search results

Summary of Contents for LD-1600

Reviews:

Related manuals for LD-1600

Brands by name

Popular brands

ELiSS LD-1600, User Manual

Search results

Summary of Contents for LD-1600

Reviews:

Related manuals for LD-1600

Brands by name

Popular brands