Linux DVR System
11.6.
Alarm Setup
This is the menu to set up the alarm which reacts when event happened to concerned
sensor. Basic setting is ALARM01. ALARM has 01~ 04.
①
Move the cursor to alarm time among sensor menu. ▲/▼button is used for the
move of cursor. ▲button moves cursor to upper side and ▼button moves cursor
to lower side. Yellow light is lit on the position where cursor is located.
②
When ▶button among Direction Movement buttons is pressed, yellow light is lit
on the rim of setup window which shows present setup value on the right side of
concerned menu,
③
To designate the alarm to react when the event happened to sensor, ▲/▼
button is used. When storage camera is selected, the color of icon becomes dark
and when cancelled, the color becomes light. ◀/▶button is used for the move
of the position of cursor.
④
Upon completion of all setup, move cursor to menu selection window by
pressing ENTER button. Then, yellow light around the rim of setup window goes
out.
11.7.
Movement to Menu Selection Initial-Screen of Setup Mode from Sensor
Setup Screen
To return to initial menu screen of setup mode after completion of all setup, press
ENTER button or CANCEL button from the top stage (designation stage of sensor) of
Sensor Setup Menu .
① ENTER button means converting to initial menu
screen of Setup Menu after storing newly set
values.
LeadTech
１０６