Product application, installation and service manual
ELIS PLZE
Ň
a. s.
Ultrasonic Flow Meter SONOELIS SE 4015 and SE 4025
Page 6 of 44
ELIS PLZE
Ň
a. s., Lu
č
ní 15, P. O. BOX 126, 304 26 Plze
ň
, Czech Republic, tel.: +420/377 517 711, fax: +420/377 517 722
Es 90 337 K/c
3.2.2 Electronic unit box dimensions
M4
210
230
10
1
1
5
2
1
7
1
9
3
1
3
8
64
85
OFFICIAL SEALS
INSTALATION SEALS
SONOELIS
ELIS PLZENa.s.
COMFORT
4xO5,5
Fig. 3 Dimensional sketch of the electronic unit box
3.2.3 Ultrasonic sensor
The sensor body is a welded piece consisting of two end flanges to be connected to the piping, the main pipe
section and two pipe branches holding the ultrasonic probes (see Fig. 4). In the standard sensor version the body is
designed for operating pressure PN 10, made of high-quality steel and the flanges are according to standard
Č
SN EN
1092-1; the whole assembly is coated with powder epoxy paint KOMAXIT E 2310 of light grey hue (RAL 7035).
On special request, the sensor body can be supplied:
- in a stainless-steel version
- with ANSI or JIS flanges
- in version for PN 16 or PN 25 (piping sizes up to DN 500)
Sensors for application in drinking-water supply systems are coated with powder epoxy paint KOMAXIT E 2110 of
blue hue (RAL 5017).
FLOW SENSOR
RATING PLATE
ULTRASONIC
PROBE
FLOW DIRECTION
Fig. 4 Ultrasonic sensor - description
