Elipson Infinite A1000, User Manual

Page: 27 / 32

27
EN
V. TECHNICAL SPECIFICATIONS
1. Main features
2. DSP specifications
3. Amplification specifications
• Class D amplifier, 1000W RMS (4 Ohms).
• DSP control for precise adjustment and configuration of the audio signal.
• 16x2 characters LCD display.
• XLR balanced left/right inputs, unbalanced RCA inputs and high-level inputs for integration into all systems.
• 1 terminal block for connecting the loudspeaker output.
• Sunbalanced left / right RCA outputs for connection of additional amplifiers and electronics.
• 12V trigger input
• 115 / 230V switchable power supply (50-60 Hz)
Volume
Subsonic filter
Crossover frequency
Crossover slope
User EQ
DSP Presets
Phase
Mode
Display mode Adjustable, -60 to + 10dB
Adjustable, 24dB per octave, 20.3 to 40.5 Hz
Adjustable, 39.4 to 204 Hz
Adjustable, 12dB-48dB per octave, 6dB increments
9 independent third frequencies (19.7 Hz - 125 Hz) with a -6dB/+3dB range
7 EQ presets set in factory (depends on the application)
Adjustable from 0 to 315°, 45° increments
Sub (crossover) or LFE
Enabled or disabled after 30 minutes of inactivity
Rated output power
THD at 1000W (4 Ohms)
THD at 1W (4 Ohms)
Frequency response
S/N ratio
Output noise
Input sensitivity
(for 1000W out)
1000W RMS <1% THD (4 Ohms)
0,07%
0,08%
Sub mode : 10-204 Hz (adjustable subsonic and crossover)
LFE mode : 10 Hz-2 kHz (adjustable subsonic)
100dB Sub / 90dB LFE
1,5mV Sub / 2mV LFE
RCA in : 220mV
XLR in : 220mV
High-level input
Line output
Auto-on sensitivity
Automatic shutdown time
12V trigger
Standby power
Dimensions without feet,
without rack brackets
2,6V
200mV (gain of about 0dB)
3,2mV
adjustable from 5 to 30 minutes, 5 minutes increments
6V DC at 2mA minimum required to trigger
<0,5W
W425,5 x H89 x D368,5 mm
Dimensions with feet
& rack brackets
W483 x H101,5 x D368,5 mm
Weight 27.3 lb (12.4 kg)