Elipson Infinite A1000, User Manual

Page: 21 / 32

21
EN
5. Trigger
To turn on/off other devices such as processors or receivers with a minimum 12V trigger output. 6V required
for the trigger. Note: Once in trigger mode, the amplifier can not be turned on without a 12V trigger signal.
To turn off the 12V trigger, turn off the unit, and then hold down the left and right navigation keys while
turning on the amplifier using its rear power switch. The trigger mode will be disabled and the amplifier will
turn on.
6. IR Port
You can connect an external infrared receiver. Connecting an IR receiver to the dedicated jack will turn
off the receiver at the front of the amplifier.
7. Speaker output
Connect your subwoofer here. The minimum load impedance is 4 ohms. You can connect multiple
subwoofers if the combined load impedance is 4 ohms or more.