Elipson Infinite A1000, User Manual

Page: 23 / 32

23
EN
Crossover frequency*
The “Crossover Freq” setting allows the crossover
frequency to be set from 39.4 to 204 Hz. Use Left
and Right buttons to set and Menu to save.
* Only available in Sub mode.
Crossover slope*
This “Crossover Slope” setting allows the crossover
slope to be set from 12dB/octave to 48dB/octave.
The higher the slope, the less mid-band information
will get through to the subwoofer, but there will be
greater phase change which might effect the
sound of the system as a whole. Use Left and Right
buttons to set and Menu to save.
* Only available in Sub mode.
Mode select
The “Mode Select” allows the amplifier to switch
between LFE or SUB mode. In LFE mode, the
crossover slope and frequency adjustments are
disabled. The crossover frequency should then be
set by an external processor/receiver. Use Left and
Right buttons to set and Menu to save.
Preset
The “Preset” setting allows nine selections:
- Flat removes any EQ and provides linear
frequency response.
- User setting allows the user to adjust and program
a personal EQ curve.
- Preset 1 to 3 are factory presets and are optimised
for Elipson Infinite S12 subwoofer.
- Preset 4 to 7 can be modified by the installer.
By default, they are equivalent to Preset 1. The
installer must load the external DSP software to
the amplifier and the USB-A cable to manage the
presets. Please contact our customer service for
this purpose. Use Left and Right buttons to set and
Menu to save.