Eliet DZC450 Page 88 Manual Download

Page: 88 / 108

English

11.6. Maintenance after every 100 hours of operation

11.6.1. Replacing the blades

The blades of the DZC450 are individually bolted onto the blade disks. Each blade can be repla-
ced individually.

Please note:

Replacing blades must always be done with the engine switched

off. Carefully pull off the cap from the spark plug.

Please note:

Always wear suitable clothing for performing this type of main-

tenance.

• Each blade holder disc has 3 blade positions that are positioned 120° to each other.
• Each of these three blade positions has two fixing holes, which allows the blades to be mounted

two positions

1. The blade can be mounted on

"scoop"

. The blade tip is mounted in the direction of rotation

of the blade axle.

• A blade mounted on

"scoop"

is necessary to create a groove

and scoop away soil. The groove that is created has depth. Even
in dry and firm soil, the groove remains at depth.

• Blades mounted on

"scoop"

form more residual dirt and create

a top dressing effect.

Summary of Contents for DZC450













































































































Search results

Summary of Contents for DZC450

Reviews:

Related manuals for DZC450

Brands by name

Popular brands

Eliet DZC450, Manual

Search results

Summary of Contents for DZC450

Reviews:

Related manuals for DZC450

Brands by name

Popular brands