manualshive.com logo in svg

Eliet DZC450, Manual

The Eliet DZC450 manual is available for free download on our website. This comprehensive manual provides detailed instructions and useful tips on operating and maintaining the Eliet DZC450 product. Get the most out of your device with our user-friendly manual, exclusively at manualshive.com.

Share
Download
background image

97

English

13.  Equipment specifications

Engine .............................................................................................................................................Honda GX200
Capacity ....................................................................................................................................................... 6.5 HP
Engine type ...................................................................................................................................................Petrol
Fuel tank capacity ..............................................................................................................3 litres (0.8 gallons)
Operating width ............................................................................................................................ 450 mm (18")
Number of blades ..............................................................................................................................................45
Type of blades ............................................ self-sharpening Permanently Sharp Blades

TM

 (3 mm - 0.1"))

Rotor .............................................................................................................................................. Ø 230 mm (9")
Work depth ......... recommended 8 to 10 mm (0.3” to 0.4”) (setting: 13 positions - 2.5 mm increment per 
position)
Number of sowing lines..................................................................................................................................... 15
Sowing spacing ................................................................................................................................... 27 mm (1")
Seed distribution system ...........................................................................ELIET Helix Seed Duct

TM

 System

Sowing activation ............................................................................................................ control on handlebar
Seed flow setting (see page 43)................................................20 gr/m

2

 - 25 gr/m

2

 - 30 gr/m

2 

- 35 gr/m

2

Seed reservoir capacity ...................................................................................................50 litres (13 gallons)
Finishing .......................................... top-dressing effect above seed bed (Topdress Rotor

TM

 Ø 100 mm)

Traction ...................................................................................................roller drive (mechanic 1 FWD speed)
Speed.........................................................................................................................................2 km/h - 1,25 m/h
Roller ............................................................................ rubberised roller Ø 100 mm x 450 mm(Ø 4" x 18")
Sound level Lw(A) .................................................................................................................................. 101 dB(A)
Dimensions (L x W x H) ..............................................................1430 x 650 x 1000 mm (56" x 26" x 39")
Weight ...........................................................................................................................................125 kg (276 lbs)
Comfort .......................................................................................................................low-vibration handlebars
 ..................................................................... handlebar height adjustable 900 mm - 1000 mm (35" - 39") 
 ........................................................................................................ all controls on handlebar, intuitive set-up
 .....................................................................................................................simple, easy to understand design
 ..................................................................................................good visibility of seed level in seed reservoir
Standard accessories .............................................................................Easy Clean

TM

 maintenance support

 ................................................................................................................................................................. Clean tool

Summary of Contents for DZC450













































































































Reviews:

No comments

Related manuals for DZC450

Daavlin 7 Series Operation Manual preview
7 Series
Brand: Daavlin Pages: 13
Daavlin 7 Series Operating Instructions Manual preview
7 Series
Brand: Daavlin Pages: 27
YardCraft Polaris Assembly Manual preview
Polaris
Brand: YardCraft Pages: 17
Obdstar BT06 Instructions For Functions preview
BT06
Brand: Obdstar Pages: 10
parr 1108 Operating Instructions Manual preview
1108
Brand: parr Pages: 20
Landoll 2110 Operator'S Manual preview
2110
Brand: Landoll Pages: 71
York Fitness 2110 Owner'S Manual preview
2110
Brand: York Fitness Pages: 4
W&H 206 Operator'S Manual preview
206
Brand: W&H Pages: 23
Bartscher 105 Original Instruction Manual preview
105
Brand: Bartscher Pages: 24
Jacobs Ladder X Owner'S Manual preview
X
Brand: Jacobs Ladder Pages: 16
ACE INSTRUMENTS AFM-5 Quick Start Manual preview
AFM-5
Brand: ACE INSTRUMENTS Pages: 2
ODA LP Series User Manual preview
LP Series
Brand: ODA Pages: 103
Califone WT1 User Manual preview
WT1
Brand: Califone Pages: 7
CALITEK Grizzly 600 Manual preview
Grizzly 600
Brand: CALITEK Pages: 16
LAHTI PRO 46033 User Manual preview
46033
Brand: LAHTI PRO Pages: 20
LAHTI PRO 46017 User Manual preview
46017
Brand: LAHTI PRO Pages: 16
J&M 32 Series Operator'S Manual preview
32 Series
Brand: J&M Pages: 53
Qazqa 46060 Instruction Manual preview
46060
Brand: Qazqa Pages: 2

Brands by name

Popular brands

Load more brands