5
List of Materials
Removing the packaging.
I
CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges.
I
WARNING
Remove the protective film covering the product before
putting into operation.
Supplied Part
Pieces
Supplied Part
Pieces
Hood assembly and
LED lamps already installed
1
Rectangular transition 3
1
⁄
4
” x 10” (8.3 x 25.4
cm) with back draft dampers
4
4.5 x 13 mm
1
3.5 x 6.5 mm
3
Parts no supplied
Tools/Materials required
• Drill with 1
1
⁄
4
” (3.0 cm) drill bit and
1
⁄
8
” (3.0 mm) drill bit for
pilot holes
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Caulking gun and weatherproof caulking compound
• Saber or keyhole saw
• Metal snips
• Screwdrivers:
- Phillips
- Flat-blade
Optional accessories and consumable parts
KIT
# Part
EAL330S2
EAL336S2
Recirculating Kit
KIT02178
KIT02179
Valve (damper) Kit
KIT02723
Grease Filters Kit
GF04BE
GF04BF
Make up Air Kit
KIT02737B
Ducting Options
Closely follow the instructions set out in this manual. All responsability, for any eventual inconveniences, damages or fires
caused by not complying with the instructions in this manual, is declined.
Ductless (Recirculating)
NOTE:
In cases where it should not
be possible to discharge
cooking fumes and vapour
to the outside, purchase: The
Recirculating Kit.
Horizontal Discharge
Use a rectangular transition
3
1
⁄
4
” x 10” (8.3 x 25.4 cm) for
discharge of fumes to the
outside.
