- 14 -
Technical Data
6
Technical Data
6.1
Identification
The type label serves for the identification of the unit. It is located on the housing of the sensor and gives the
exact type designation (=order reference, see type designation, chapter 7) with the corresponding part number.
Furthermore, the type label contains a unique, traceable device number, the production date as well as the
hardware and software versions.
When corresponding with ELGO always indicate this data.
Fig. 3: Type label for identification of the sensor
Also, there is an info label on the sensor that gives the following additional information on the sensor: manufac-
turer, supply voltage, power consumption, CRC check sum of the software and the registration number of the
certificate.
Fig. 4: Info label with additional information
6.2
Safety Parameters
Designation
Value
Remark
Safety Integrity Level
SIL 3
PFH [1/h]
2.2 E-9
2.2 % of SIL 3
PFD
avg
1.9 E-4
19 % of SIL 3
Proof Test Interval T
1
20 years
6.3
Technical Data Magnetic Tape and Presence Detector
ZS 256-11ZR-1519
Regulations:
IEC/EN 60947-5-1
BG-GS-ET-15
Operating temperature:
-30 °C … +80 °C
Dimensions (without cable):
L x B x H = 58 x 50.5 x 31 mm
Protection class:
IP67
Usage category:
AC-15; DC-13
I
e
/U
e
4 A / 230 VAC; 1 A / 24 VDC
Short-circuit protection:
6 A gL/gG D-fuse
Terminal cross-section:
min. 1.5 mm²; max. 2.5 mm² (incl. cable end sleeves)
