- 22 -
Installation and First Start-Up
8
Installation and First Start-Up
CAUTION!
Please read the operating manual carefully before using the device!
Strictly observe the Installation instructions!
In case of damage caused by failure to observe this operating manual,
the warranty expires.
ELGO is not liable for any secondary damage and for damage to per-
sons, property or assets.
The operator is obliged to take appropriate safety measures.
The first start-up may only be performed by staff that has been trained
and authorized by the operator.
On the installation of the LIMAX44 RED system, the national regula-
tions and as far as applicable the EN 81-20 (previously EN 81-1/2)
are to be considered.
8.1
Operating Area
WARNING!
Do not use the device in explosive or corrosive environments!
The device must not be installed close to sources of strong inductive or
capacitive interference or strong electrostatic fields!
CAUTION!
The electrical connections must be made by suitably qualified person-
nel in accordance with local regulations.
The device may be designed for switchboard mounting. During work
on the switchboard, all components must be de-energized if there is a
danger of touching the energized parts!
(protection against contacts)
Wiring works may only be performed in the de-energized state!
Thin cable strands have to be equipped with end sleeves!
Before switching on the device, connections and plug connectors have
to be checked!
The device must be mounted in a way that it is protected against harm-
ful environmental influences such as splashing water, solvents, vibra-
tion, shock and severe pollution and the operating temperature must
not be exceeded.
