ELGA PURELAB Prima 15, Operator'S Manual

Page: 15 / 34

ELGA PURELAB Prima 7/15/30 Operator Manual
PURELAB Prima 7/15/30 Version 01 09/08 Page 11
5. INSTALLATION INSTRUCTIONS
5.1 Unpacking the PURELAB Prima
The following items should be supplied with your PURELAB Prima :
1. PURELAB Prima unit.
2. Installation kit (LA513 or LA506).
3. Operator manual.
4. Mains lead.
5.2 Positioning the PURELAB Prima
Before commencing with installation and operation of the PURELAB
Prima unit, please read and observe the following points.
Environment
The unit should be installed on a flat, level surface, in a clean,
dry environment. The unit can also be wall mounted against a
vertical wall capable of supporting the weight (for this we
recommend the use of the wall mounting kit Part No LA 610).
CAUTION
! If unit is to be wall mounted, ensure it is
mounted on a substantial solid wall
capable of supporting the operating
weight of the system. If mounting the unit
on the wall, use the wall mounting kit and
follow the instructions included in the kit.
Note: Refer to specifications for unit weights.
The unit is designed to operate safely under the following conditions:
•
Indoor use.
•
Altitude up to 2000m.
•
Temperature Range 5 - 40°C.
•
Maximum Relative Humidity 80% at 31°C decreasing
linearly to 50% at 40°C, non-condensating.
The unit is in Installation Category II, Pollution Degree 2, as Safety
Standard IEC1010-1.
Rear mounting locations points
Unit Rear Mounting Points