elero MultiTec Touch-868, Operating Instructions Manual, Page: 6 / 27

10 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 11
‰
The operator of the device or the personnel authorized
by him is ultimately responsible for accident-free opera-
tion.
2.4 Requirements for the personnel
‰
Any person who is assigned to work with the device
must have read and understood the entire manual be-
fore performing the relevant work. This is true even if the
person has already worked with such a device or has
been trained for it.
‰
All work at the device must be carried out by trained,
safety technically trained and authorized personnel.
Before starting any activities, the staff must be made
familiar with the dangers when handling the device.
‰
All persons must only perform work according to their
qualifications. The responsibilities of the respective staff
must be clearly specified.
‰
Any personnel who have been assigned to work with the
device must not have a physical disability, the attention
and judgement must not be temporarily or permanently
restricted (e.g. due to fatigue).
‰
The handling of the device and all assembly, disassem-
bly and cleaning work by minors or persons who are
impaired by alcohol, drugs or medication influence, is
not permitted.
2.5 Safety instructions for technical condition
‰
The operator is required to operate the device in a
proper and safe condition. The technical condition must
comply with the statutory requirements at all times.
‰
If danger to persons or changes are recognized in op-
erating performance, the device must be immediately
taken out of service and reported to the operator of the
system.
‰
No changes to the device, additions or modifications
should be performed without prior approval of the manu-
facturer.
2.6 Safety instructions for operation
‰
The user of the device is required to satisfy himself of
the safe and proper condition of the device prior to the
first use.
‰
That is also necessary at regular time intervals during
the operation of the device which can be specified by the
operator. The operator is responsible for performance
before commencement of operation.
3 Product description
The MultiTec Touch-868 /-915 is an easy to handle multi-
channel radio wall transmitter.
The device permits comfortable, wireless controlling of
elero receivers in roller shutter, Venetian blind and sun
protection facilities. Control of bidirectional receivers such
as the elero Combio LI ET/MT, Combio HE and Unio-868
as well as connected devices is possible as well (electrical
light, electrical heating).