elero MultiTec Touch-868, Operating Instructions Manual, Page: 3 / 27

4 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 5
Delete channel 31
3.11 Settings → Channels → Channel →
Activate programming mode 31
3.12 Settings → Central channel 32
3.13 Settings → Product info 35
4 First programming of the transmitter
in a channel 37
4.1 Program further transmitters into a channel. 39
4.2 Stopping programming mode (bidirectional)
in the transmitter
40
4.3 Approaching limit positions of roller
shutter / awning / Venetian blind
41
4.4 Operation of the MultiTec Touch-868 /-915
with Combio JA Pulse
43
4.5 Moving to intermediate position / ventilation
position / turning position
44
4.6 Delete transmitter channel in the receiver or
Delete all transmitters in the receiver
45
5 Specifications 45
6 Cleaning and maintaining the device 46
7 Certification 47
7.1 EC Declaration of Conformity 47
7.2 Certification FCC / IC 47
8 Troubleshooting 48
9 Repair 49
10 Manufacturer's address 49
11 Disposal /
notes on environmental protection 50
1 General
1.1 Notes on the Operating Instructions
The content structure is based on the radio wall transmitter
MultiTec Touch-868 /-915 (hereinafter referred to as
"Device").
The manufacturer reserves the right to make changes to the
Specifications stated in these Operating Instructions at any
time. These may, in individual cases, be different from the
respective device version, however the functional informa-
tion will not undergo significant changes or become invalid.
The current version of the Specifications may be requested
from the manufacturer at any time. No claims may be as-
serted against the manufacturer as a result of the preceding
sentence. Deviations from text or picture statements are
possible and depend on the technical development, fea-
tures, and accessories of the device. Deviating information
on special versions will be explained by the manufacturer
in the sales documentation. Other information shall remain
unaffected by these provisions.
1.2 Standards and Directives
During the design process, the basic health and safety re-
quirements of the applicable laws, Standards and Directives
were complied with. The safety is confirmed by the declara-
tion of conformity (see Chapter 7, Declaration of Conform-
ity). All safety information in these Operating Instructions
refer to the laws and regulations currently applicable in
Germany. All instructions in the Operating Instructions shall
be observed without limitation and at any time. Beside the
safety instructions contained in these Operating Instruc-
tions, the provisions for accident prevention, environmental
protection and occupational safety, which are applicable for