32 | EN
Ⓒ
elero GmbH
Ⓒ
elero GmbH
EN | 33
If the P button is now pressed on the transmitter, all receiv-
ers start the programming mode simultaneously (indicated
by travelling up or down). An offset is created between the
receivers by randomly different pauses between the open-
ing and closing movements. The longer programming is
delayed, the greater the offset will be.
You can stop the short opening and closing movements by
briefly pressing the STOP button on a transmitter which has
already been programmed. The programming mode in the
receiver is interrupted.
The transmitter can now be assigned without having to
disconnect individual receivers. If the curtain moves in the
wrong direction, delete the transmitter and program it again.
3.11.2 Synchronous programming
For programming one transmitter to multiple receivers at the
same time.
Travelling up and travelling down of the receivers starting
synchronously. Concurrent programming on several facili-
ties possible
3.12 Settings
→
Central channel
Status line: Channel/Group settings - central channel
Submenus as for a single channel
3.12.1 Settings → Central channel → Administration
Status line: Change administration data of central channel
Change display text
Editor with switchable layout (alphanumeric)
Reset channel data
Data of the central channel are deleted. The assignment to
the receiver is retained.
3.12.2 Settings → Central channel → Programs
Status line: Select program - central channel
As for a single channel (Settings → Channels → Channel
→ Programs):
Switching times off:
Timed switching commands are not executed.
Astro times switching program:
Controls the calendar-related (day-specific) up and down
according to Astro function in accordance with the sunrise
and sunset times. Programmable lock times prevent up and
down movement occurring too soon.
Astro offset:
For individual adjustment of the astro switching times by
selecting an offset for the time of opening and/or an offset
for the time of closing by up to 120 minutes.
Individual switching program:
Calendar-relatedly (day-specific) definable switching times
for opening and closing times.
Astro evening switching program:
Controls the calendar-related (day-specific) up and down
movement according to Astro function based on the time
of sunset. The programmable lock time prevents too early
downward movement.
Summary of Contents for MultiTec Touch-868
Page 27: ...52 EN Ⓒ elero GmbH ...
