elero MultiTec Touch-868, Operating Instructions Manual, Page: 5 / 27

8 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 9
If you have not purchased the device directly from elero,
please contact the supplier of the device.
When requesting customer service, keep the serial number
at hand. It is located on the rating plate on the rear of the
device.
2 Safety
2.1 General safety instructions
The Operating Instructions contain all safety instructions
which must be observed in order to prevent dangers inher-
ent to handling the device in connection with the drives and
components to be controlled in the individual life phases. A
safe use of the device can only be ensured when all given
safety instructions are observed.
2.2 Safety principles
The device is designed according to state of the art and
recognized safety standards and is safe to operate. Dur-
ing the design process of the device, the basic health and
safety requirements of the applicable laws, Standards and
Directives were complied with. The safety of the device is
confirmed by the declaration of incorporation.
Any information relating to safety are based on the currently
valid regulations of the European Union. In other countries,
it must be ensured by the operator that the applicable laws
and state regulations are complied with.
In addition to the safety instructions in this operating
manual, the general regulations for accident prevention and
environmental protection must be observed and adhered to.
The device is to be used only in a technically flawless state
as well as in accordance with the requirements, conscious-
ness of risk and in compliance with the operating instruc-
tions. The device is designed for use as described in chap-
ter "Intended Use". In case of improper use, threats to life
and limb of the user or third parties or damage to the device
or other property may occur. Accidents or near accidents
when using the device, that have resulted or could have
resulted in personal injury and / or damage to the environ-
ment, shall be reported to the manufacturers directly and
immediately.
All safety precautions listed in the operating instructions and
on the device are to be observed. In addition to these safety
instructions, the operator shall ensure that all national and
international regulations in force in the country of use, as
well as other binding regulations for occupational safety, ac-
cident prevention and environmental protection are met. All
works on the device must be carried out by trained, safety
technically trained and authorized personnel.
2.3 General operational regulations
‰
The operator is obliged to use the device only in a
proper and safe condition. He must ensure that in addi-
tion to the safety instructions in the operating manual,
the general safety and accident prevention regulations,
the requirements of DIN VDE 0100, and the rules of the
environmental protection of the country of use are re-
spected and adhered to.
‰
The operator is responsible for ensuring that all work is
carried out with the device by trained, safety instructed
and authorized personnel.