elero MultiTec Touch-868, Operating Instructions Manual, Page: 19 / 27

36 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 37
Change display text:
Editor with switchable layout (alphanumeric)
Add channels:
Selection of a single channel adds the channel to the group.
Several selections in sequence are sensible. Channels
added to a group appear brightly backlit in the display (ac-
tive).
3.13.3 Settings → Groups → Group → Programs
Status line: Select program - group number
Switching times off:
Timed switching commands are not executed.
Astro times switching program:
Controls the calendar-related (day-specific) up and down
according to Astro function in accordance with the sunrise
and sunset times. Programmable lock times prevent up and
down movement occurring too soon.
Astro offset:
For individual adjustment of the astro switching times by
selecting an offset for the time of opening and/or an offset
for the time of closing by up to 120 minutes.
Individual switching program:
Calendar-relatedly (day-specific) definable switching times
for opening and closing times.
Astro evening switching program:
Controls the calendar-related (day-specific) up and down
movement according to Astro function based on the time
of sunset. The programmable lock time prevents too early
downward movement.
3.13.4 Settings → Groups → Group → Configuration
Status line: Change configuration - group no.
Program position Down:
Valid for time-controlled travel commands: Select a target
run to the lower end position or the intermediate position or
ventilation position (differently sensible depending on appli-
cation roller shutter, Venetian blind or awning).
Program position Up:
Valid for time-controlled travel commands: Select a target
run to the upper end position or the intermediate position or
ventilation position (differently sensible depending on appli-
cation roller shutter, Venetian blind or awning).
Priority Clock:
Priority automatic commands On or Off
Shading Clock:
With the function Shading Clock activated: A time-controlled
down command switches off the automatic shading sys-
tem (privacy protection). A time-controlled open command
switches on the automatic shading system again.
4 First programming of the transmitter
in a channel
Prerequisite
:
The bidirectional receiver is installed. Check whether the
respective channel is deleted or in the correct mode accord-
ing to the status display.