33
INSTALLER INFORMATION
INSTALLATION OF THE GLASS WINDOW
Remove the window trims left, right and bottom like shown in figure 1, 2, 3
Unscrew the crosshead screws and remove the metal clamps which hold the glass window in
place (top and bottom glass window). See figure 4.
Now remove the glass window by lifting the
glass and then bring it forward. See figure 5.
When the glass window is placed back again,
DON’T tighten the screws of the metal clamps
too tight.
This brings tension and might cause the glass
window to break.
Figure 4
Figure 5
33
INSTALLER INFORMATION
INSTALLATION OF THE GLASS WINDOW
Remove the window trims left, right and bottom like shown in figure 1, 2, 3
Figure 1
Unscrew the crosshead screws and remove the metal clamps which hold the glass window in
place (top and bottom glass window). See figure 4.
Now remove the glass window by lifting the
glass and then bring it forward. See figure 5.
When the glass window is placed back again,
DON’T tighten the screws of the metal clamps
too tight.
This brings tension and might cause the glass
window to break.
Figure 4
Figure 5
Figure 2
Figure 3
33
INSTALLER INFORMATION
INSTALLATION OF THE GLASS WINDOW
Remove the window trims left, right and bottom like shown in figure 1, 2, 3
Figure 1
Unscrew the crosshead screws and remove the metal clamps which hold the glass window in
place (top and bottom glass window). See figure 4.
Now remove the glass window by lifting the
glass and then bring it forward. See figure 5.
When the glass window is placed back again,
DON’T tighten the screws of the metal clamps
too tight.
This brings tension and might cause the glass
window to break.
Figure 4
Figure 5
Figure 2
Figure 3
33
INSTALLER INFORMATION
INSTALLATION OF THE GLASS WINDOW
Remove the window trims left, right and bottom like shown in figure 1, 2, 3
Figure 1
Unscrew the crosshead screws and remove the metal clamps which hold the glass window in
place (top and bottom glass window). See figure 4.
Now remove the glass window by lifting the
glass and then bring it forward. See figure 5.
When the glass window is placed back again,
DON’T tighten the screws of the metal clamps
too tight.
This brings tension and might cause the glass
window to break.
Figure 4
Figure 5
Figure 2
Figure 3
Summary of Contents for Bidore 140
