8. Data Management
© ElektroPhysik
MiniTest 2500 - MiniTest 4500
45 of 73
Note:
To cancel printing, press and hold
Statistical values can be viewed at any time, even while a series of measurements is being taken.
8.10.2
Block value statistics
In block value statistics mode (see section 11.2.1), statistics can be displayed or printed out as
below.
1.
Displaying single value statistics
Each time the STATS key is pressed the statistical values will appear in the following: n
(number of blocks),
𝑥̿
(Mean of all blocks),
σ (StdDev), V (Var),
(Maximum block value),
(Minimum block value), Cp, Cpk.
2.
Visualize block values
Press “STATS” key to enter the statistic menu.
The arrow keys “
” or “
” allow to scroll through the single readings of a series of measurements.
The gauge will display a sequential number of blocks 1, 2
…, the active measuring principle Fe or
NFe and the corresponding block value (
𝑥̅
) and as well as alternately the
standard deviation (σ) of
the block.
3.
Complete print-out of measuring and statistical values
Press and hold Stats/Send key. If the gauge is connected to a printer MiniPrint 7000 BT via
Bluetooth (only MiniTest 4500), all measuring values including statistics, date, time and sensor
type in use will be printed now.
Alternatively, these values can be transferred to a PC terminal program, for example MSoft 7000
via the USB interface.
Press Stats/Send key and hold.
Note:
To cancel printing, press and hold
Statistical values can be viewed at any time, even while a series of measurements is being taken.