4. Measuring, Storage and Data Processing in DIRECT or APPL-BATCH mode
© ElektroPhysik
MiniTest 2500 - MiniTest 4500
17 of 73
4.2 Structure of the APPL-BATCH system
MiniTest 2500 and MiniTest 4500 generally group reading in series of measurements in one
memory batch. MiniTest 2500 features one fixed memory (DIRECT) whereas MiniTest 4500
features one DIRECT memory and 99 application memories (APPL) combined with memories for
series of measurements (BATCH).
New readings are always added to the active memory and stored. The gauge will preserve the
active memory when switched off and automatically resume this memory when switched on again
not requiring any further settings. The following actions are possible:
-
Continue to measure in active memory
-
Set up a new series of measurement (BATCH) within an application memory (APPL)
-
Set up of a new application memory (APPL) with corresponding series of measurement
(BATCH)
-
Selection of an existing series of measurement (BATCH) within an application memory
(APPL)
-
Selection of an existing application memory (APPL) with corresponding series of
measurement (BATCH))
Perform one of the above mentioned actions in order to specify the active series of measurement
(BATCH) for measurements hereinafter.
The application memories (APPL) with their corresponding batch memories (BATCH) allow to
store calibration settings for different applications in an application memory (APPL). The batch
memory (BATCH) stores single readings of a series of measurement along with their statistical
analysis (see illustration: APPL-BATCH memory).
BATCH memory columns
APPL
(application) memory
lines
1
2
3
...
97
98
99
1
1
2
3
97
98
99
2
1
2
3
97
98
3
1
2
3
97
98
.
.
.