background image

 

Page 9 of 20                                                                                                M6627   Issue 7.0 

 

6. 

ENVIRONMENTAL PROTECTION. 

 

6.1. 

Electrothermal has given due consideration to environmental issues within the 
design and manufacturing process without compromising end product 
performance and value.

 

 

6.2. 

 

 Packaging materials have been selected such that they may be sorted for 

recycling.

 

 

6.3. 

 At the end of your product and accessories life, it must not be discarded as 

domestic waste. Ref: EU Directive 2002/96/EC on Waste Electrical and Electronic 
Equipment Directive (WEEE). Please contact your distributor / supplier for further 
information. For end users outside of the EU consult applicable regulations.

 

 

6.4. 

This product should only be dismantled for recycling by an authorised recycling 
company. 

 

 

This product and accessories must be accompanied by a completed 

Decontamination Certificate prior to any disposal.

 

Copies of the Certificate are available 

from your distributor of Electrothermal products, or you may copy and enlarge from 
‘Appendix A’ of the instruction book.

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Electrothermal is registered as Electrothermal Engineering Limited with the Environment Agency as a producer of 
WEEE through an authorised compliance scheme.  

 

 
 
 

Summary of Contents for MH6616





















Reviews: