Factory Re-set
Aeroflow Radiator
Press the OK button to illuminate the
screen first if needs be.
Press the OK menu
Use the arrow down button to scroll
down once to configuration and
press OK
Press the arrow down button 9 times
to get to ‘factory re-se’ and press ok
Follow the instructions on the
display, which just ask you to press
and hold the left button in for around
5 seconds.
Aeroflow Gateway Hub
Press and hold the inset button on the
back of the Aeroflow Gateway hub using a
paper clip or such like, for around 10
seconds. You will see a blue light appear,
keep the pin held in until the blue light
disappears and the red light begins to
blink, then release the pin
Uninstall the app, then re-install it again.
Summary of Contents for Aeroflow Series
Page 1: ...User friendly guide ...