Electrorad Aeroflow Series, Userfriendly Manual

Page: 13 / 21

You now need to select time frame 2, to do this, click the + button in the top right hand corner, you should notice that the
time frame 2 is highlighted in dark grey to show this is what we are setting, and zone 1 will become white to show that this
has been set.
Now click in the ‘instruction’ box to select the desired temperature for this time frame. Again, most people don’t want to
heat the temperature too high during the evening, so we can select a relatively low temperature, for example 14 degrees.
This means that the radiator will only come on if the room temperature falls to less than 14 degrees, and keep the room at
this set point. Now press done.
The start time should now default to the time that zone 1 ended in, so in this example, it starts at 7am. You may want the
heating to come on for 1 hour while you get ready for the day. Click in the ‘end time’ box again and change the time to
8am, then press accept. You then need to click on instruction and select your desired set point temperature for this time
frame, this may be around 20 degrees, then press done.
Now lets move to time zone 3 which is when you are out at work for the day and probably don’t require the radiator to be
heating. Again your start time will default to 8am as this is the time your last time frame ended. If you are home for
5.30pm, then lets set this as the end time for this time frame. And select the temperature as a low you desire, lets say 14
degrees as an example, again press done. You will notice the bar along the bottom of the screen shows different colours
for each time frame.
Make sure time zone 1 is highlighted in grey and the start time should be set as default to 00:00am. Leave that as it as as
you need to complete an instruction for every hour of the day for the cylcle to be complete.
Now Click on end time. Remember most people will not want their heating on high through the nigh time which is the zone
that we are currently setting, so your end time will be when you want the radiator to next come on. Lets say you want the
heating to come on a7 7am, for this timing zon 12am – 7am, this will be your end time. Select 7am (or your chosen time,
remembering the adaptive start function feature) then press ‘accept’