Your phone may or may not then present you with the following message; press accept to fully synchronise your
devise and the radiator. This is just to make sure your device and the radiator are on the same time as to not cause
confusion when trying to set programes.
You should now see that your named room is listed when you click back into the
heating section at the top left of the screen.
You can now turn the set point of the radiator up and down using your phone. If you click on the
room on your phone, you can see the room temperature at the top right and the set point
centrally in the white box. To adjust the temperature, use the red plus key or the blue minus key
to adjust accordingly, then you must press modify to send the instruction to the radiator.
Repeat steps 9 to 16 to pair up all the radiators that you have to your device.
Summary of Contents for Aeroflow Series
Page 1: ...User friendly guide ...
