To set a program.
You can set each individual radiator on its own programmed time settings, multiple radiators together, or all on the same programme by
using the tabs along the top of the screen when you are on the heating page of the app. You can have 6 different time changes per radiator
per day and you must always start from midnight and end at midnight to complete the days cycle.
To set an independent set of timings on one radiator:
Open the Aeroflow app, click ‘heating’, click ‘programs’ at the bottom of the screen, make sure that
the ‘one’ tab is highlighted in grey and click on your chosen radiator from the list of radiators you have
paired up on your devise, eg living room. (It will say ‘not programmed’ if no program has currently
been set for this radiator)
You will now be presented with the ‘Zones to be programmed’ page. Click edit program to change or create a program.
You can now either select one day at a time, multiple days or all. Lets imagine you work 9am – 5pm
Monday to Friday. Lets start by programming Mon – Fri. Click on the ‘multiple’ tab at the top middle of the
screen and then click on the circles on the right for mon – fri, you will notice a tock will appear in the
circles. Then click proceed.
You will now be presented with ‘Time Frames’ You can have 6 different time changes per radiator, per day and you
must always start from midnight and end at midnight to complete the days cycle. Lets start at time frame 1.
Summary of Contents for Aeroflow Series
Page 1: ...User friendly guide ...