8
E
lectron
M
icroscopy
S
ciences
1560 Industry Road Hatfield, PA 19440
P.O. Box 550
TEL: 215-412-8400 TOLL FREE: 1-800-523-5874
FAX: 215-412-8450
EMAIL:
WEB:
www.emsdiasum.com
-
You have 500 MB of free space on your hard disk drive.
-
The Pathscan Enabler IV is plugged in and has power.
-
You are using the USB cable supplied with the Pathscan Enabler IV.
-
The square end of the USB cable is plugged into the rear of the Pathscan Enabler IV.
If you feel there was an error in the installation process defined in this manual, please unplug the USB
cable from the Pathscan Enabler IV and reinstall the software from the CD-ROM. To reinstall your
Pathsca
n Enabler IV’s software, click START, RUN, and then type [D:\Install] (where D represents the
letter of your CD-ROM drive). Carefully follow all the installation instructions presented in the Setup
Wizard. Reboot your computer when prompted, and plug the USB cable back into the Pathscan
Enabler IV while your computer is still turned on.
Installing additional software
Your Pathscan Enabler IV is TWAIN compliant and functions with virtually all available TW AIN
compatible software. If you purchase additional software to be used with your Pathscan Enabler IV,
please make sure that it is TWAIN compatible.
Usage and maintenance
Operating the Pathscan Enabler IV
NOTE
: Your Pathscan Enabler IV accepts to work with U.S. standard glass slides, 1.1mm thick, 1 x 3
in. in length and No. 1 coverslips. Some software programs have limitations as to the information they
can process. The capacity of the computer’s memory and free space on your hard drive can also limit
the physical size of the document that you scan.
There are different ways to operate the Pathscan Enabler IV:
1. From within an image-editing program that can acquire images from the Pathscan Enabler IV.
2. Using QuickScan feature by pressing QuickScan button. The QuickScan Setting program is
automatically installed as your Pathscan Enabler IV software.
3. Using SilverFast Launcher by pressing SilverFast button. This stand-alone program allows you
to perform advanced scanning features. For further information, please refer to SilverFast
User’s Manual.
An image-editing program has been bundled with your Pathscan Enabler IV on the included
Setup/Application CD-ROM. It will allow you to alter and correct any scanned images by using a variety
of filters, tools, and effects.
QuickScan is a program that allows you to conveniently scan images without the need to work directly
within any image-editing application (i.e. Presto! ImageFolio).
