15
E
lectron
M
icroscopy
S
ciences
1560 Industry Road Hatfield, PA 19440
P.O. Box 550
TEL: 215-412-8400 TOLL FREE: 1-800-523-5874
FAX: 215-412-8450
EMAIL:
WEB:
www.emsdiasum.com
Default
:
Clicking this button resets the values of all settings to their default
values.
Status indicator
The green LED indicator (above the SilverFast button) indicates the status of the Pathscan Enabler IV, as
described below:
Light
Status
On
The Pathscan Enabler IV is connected with the computer, ready to scan
images.
Off
The Pathscan Enabler IV is off, either because of disconnection with the
computer, or because the computer has been turned off.
Pathscan Enabler IV connection
The first step to take when troubleshooting connection problems with your Pathscan Enabler IV is to
check all physical connections. The QuickScan icon located on the Windows system tray indicates if the
Pathscan Enabler IV software is properly launched and the Pathscan Enabler IV and computer are
communicating with each other.
Appearance
Status
The QuickScan program has been successfully launched and the
Pathscan Enabler IV is connected with the computer, ready to scan
mages.
The Pathscan Enabler IV is not connected with the computer.
No Display
You have chosen to terminate the QuickScan program, no matter the
Pathscan Enabler IV is connected or disconnected with the
computer.
If the Windows system starts and detects the Pathscan Enabler IV unconnected, the following message
will appear to remind you:
