5
E
lectron
M
icroscopy
S
ciences
1560 Industry Road Hatfield, PA 19440
P.O. Box 550
TEL: 215-412-8400 TOLL FREE: 1-800-523-5874
FAX: 215-412-8450
EMAIL:
WEB:
www.emsdiasum.com
Installing the PathScan Enabler IV
Software installation requirements
Your Pathscan Enabler IV comes with the image-editing software (Presto! ImageFolio), document
management software (Presto! PageManager), the Paths
can Enabler IV’s driver, QuickScan Setting and
LaserSoft SilverFast software. All of these software applications use approximately 160 megabytes of
hard disk space once installed onto your computer. To ensure room for installation, a minimum of 260 MB
of hard disk space is recommended. The USB Pathscan Enabler IV can only operate under the Microsoft
Windows Vista, 2000 Professional or XP operating system.
Hardware requirements
This Pathscan Enabler IV connects to your computer through USB, which supports hot Plug and Play. To
determine whether your computer is USB-capable, you must check the rear of your PC to locate a USB
jack that looks the same as the one pictured below.
Installing and setting up the Pathscan Enabler IV
Step 1: Connecting the Pathscan Enabler IV to your computer
USB
Connector(s)
