6
E
lectron
M
icroscopy
S
ciences
1560 Industry Road Hatfield, PA 19440
P.O. Box 550
TEL: 215-412-8400 TOLL FREE: 1-800-523-5874
FAX: 215-412-8450
EMAIL:
WEB:
www.emsdiasum.com
1.
Plug the power adapter into the Pathscan Enabler IV’s power receptor.
2. Plug the other end of the power adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port at the rear of the Pathscan
Enabler IV.
4. Plug the rectangular end of the USB cable to the USB port on the back of your computer.
NOTE
: If there is another USB device connected to the computer, connect the Pathscan Enabler
IV to an available USB port.
5. If you plan to connect your Pathscan Enabler IV to a USB hub, make sure that the hub is
connected to the USB port in your computer. Next, connect the Pathscan Enabler IV to the USB
hub.
NOTE
: If you do not have a USB port available, you might need to purchase one.
Step 2: Installing the software
1. If the USB components on your computer are functioning correctly, they will automatically detect
the Pathscan Enabler IV, causing the “Add New Hardware Wizard” or “Found New Hardware
Wizard” to be launched.
NOTE
: If your
computer was off when your connected the Pathscan Enabler IV, the “Add New
Hardware Wizard” message will be displayed when your turn on the computer and when
Windows starts.
2. For Windows 2000
a.
Click on the “Next” button when the “Add New Hardware Wizard” window displays.
b.
Select “SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE [RECOMMENDED]”
and click on NEXT.
c. The next window will ask you where to search to find the d
rive. Select “CD-ROM drive”
and deselect “Floppy sick drives” if it is checked.
d. Insert the Setup/Application CD-ROM included with your Pathscan Enabler IV, into your
CD-ROM drive and then click NEXT.
