10
E
lectron
M
icroscopy
S
ciences
1560 Industry Road Hatfield, PA 19440
P.O. Box 550
TEL: 215-412-8400 TOLL FREE: 1-800-523-5874
FAX: 215-412-8450
EMAIL:
WEB:
www.emsdiasum.com
Insert the tissue slide holder
Insert the tissue slide holder into the Pathscan Enabler IV through dust cover. The tissue slide
holder can be inserted from either side. The tissue slide holder will index at each frame using the
notches on its side rails. Please allow about 40cm of space on both sides of the Pathscan
Enabler IV to insert and remove the tissue slide holder.
ATTENTION:
You can feel the tissue slide holder stop in its index position. However,
before performing scan, please gently push and pull the tissue slide
holder to make sure the tissue slide holder is in correct position.
On up side of the tissue slide holder you can see the “tissue slide
holder”. Always keep this side up for correct scan results.
The tissue slide holder should be able to be inserted in to the Pathscan
Enabler IV with ease. Do not push the tissue slide holder with force.
Using SilverFast button
The SilverFast button enables you to activate bundled SilverFast 6.5, which performs advanced
scan features, such as Dust and Scratch removal, Grain and Noise Elimination, Negative
Optimization, etc.
