manualshive.com logo in svg

Electrolux ICON Professional E48DF76EPS, Service Manual

Share
Download
Electrolux ICON Professional E48DF76EPS Service Manual Download Page 48

48

OVEN LIGHT

Your new range has halogen oven lights to enhance
the view into the oven. The light assembly consists of a
removable lens cover and 20-watt 120VAC halogen
bulb (OSRAM - Part Number 64428), as well as a light
fixture housing. Light bulb replacement is considered
to be a homeowner maintenance operation.

          WARNING

To prevent electrical shock and/or personal injury:
Make certain that the oven and light bulb are cool
and that power to the oven has been turned off be-
fore replacing the light bulb.

Always ensure that the lens cover is in place when
using the oven. The lens cover protects the bulb
from breakage caused by high oven temperatures
or mechanical shock.

To replace the light bulb:

1.

Turn off the power at the main power supply.

2

. Remove rack supports in order to access the light

housing.

3.

Remove the lens cover from the housing by pulling
straight out.

4.

Replace halogen bulb taking care not to touch the
bulb. If you touch the halogen bulb with your finger,
body oils can shorten the bulb life.

5.

To replace glass shield, reverse the procedure.

Summary of Contents for ICON Professional E48DF76EPS

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands