manualshive.com logo in svg

Electrolux ICON Professional E48DF76EPS, Service Manual

Share
Download
Electrolux ICON Professional E48DF76EPS Service Manual Download Page 26

26

Feature Overview

Before using your range, become familiar with the fea-
tures and control panel layout. See drawering below

 

for

a detailed control panel layout for your model.

NOTE: Upon initial power being applied to the

range, the function LED lights will flash
while the electronic control completes its
self test mode. The lights will continue
flashing until the Function Knob is moved

to some other position and back to “Off”.
At this time the range is ready for use.

NOTE: If a power outage occurs, the above noted

test sequence will take place. The function
LED lights will flash. The LED lights will
continue to flash until the Function Knob is
moved to some other position and back to
“Off”. At this time the range is re-set for use.

1.  Control Panel

2.  Broiling Element
3.  Oven Door Latch

4.  Convection Fan & Element
5.  Bake Element

6.  Oven Door

7.  Oven Racks
8.  Oven Rack Supports

9.  Oven Rack Glides

10. Companion Oven

MODEL FEATURES

Summary of Contents for ICON Professional E48DF76EPS

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands