Electrolux IC44819 FLF, Service Manual, Page: 214 / 290

6
17
Work Time : 00000:00
MaxT : 00C 00C 00C
Heating Time: 000:00
Work Time: 000:00
Length Value 1550
CMIS Address 005
Speed Min. 1.5m/min
Speed Max. 5.5m/min
Service
Manual
Control display
04106016/GB
43-09
This screen displays the total operating time and the
maximum value readied by the temperatures sensors
(in the event of rupture of the thermal fuse) since the
machine was first started-up.
This parameter cannot be reset to zero.
Display the total operating time and the
maximum value of temperatures
The first line of this screen displays the daily
operating time of the machine’s heating system in
hours and minutes.
The second line shows the daily operating time of
the machine in hours and minutes.
These parameters are reset whenever the sheet
counter is reset to zero or the machine is switched on.
Daily operating time display
The first line of this screen displays the distance in
mm between the cell of the feeding table and the
moisture sensor. This value is set in the factory and
is not to be altered.
The second line displays the network connection
address of the machine when used with the CMIS
system (optional PC-based centralised management
and information system)
Operating parameters
This screen displays the maximum and minimum
ironing speed values declared during machine startup
relative to the frequency converter.
Ironing speed display