Electrolux IC44819 FLF, Service Manual, Page: 129 / 290

7
11
Service
Manual
Feeding : Feeding clamps
04106016/GB
43-09
Before any intervention it is essential to cut off all supply of the machine
(electricity, steam, water, gas, compressed air...).
Repair
electromagnets e1 and e2 :
Checking
- Check the wiring.
- Using a multi-meter, check the coil’s ohmic value. If it equals 0, the electromagnet is faulty.
Replacing
- Remove the splash guard from the clamp having a faulty electromagnet.
- Disconnect the cables from the faulty electromagnet.
- Remove the faulty electromagnet of the pliers.
- Remove the came of the faulty electromagnet.
- Put the came on the new electromagnet.
- Put the new electromagnet on the pliers.
- Adjust the new electromagnet (see next page).
- Put the splash guard back.