Electric supply:
• The electric contact-voltage proof must be
ensured by installation.
• Screws of the saucepan carrier holder
must be firmly tightened, because they
serve as protective earth connection.
• Mains cable may not cling to back wall of
device or other hot spots.
• Used wall socket (230 V, 50 Hz, min. 10 A)
must be installed by a qualified person and
conforming to standards. The wall socket
has to be accessible.
• Do not lay mains cable of other devices
over gas burner or squeeze between oven
door.
Recommendation: Let have device connec-
ted via residual current operated device 30
mA.
Gas connection:
• Let have connection and commissioning,
as well as change over to another type of
gas have made according to regional reg-
ulations by gas supplying company or li-
censed installer.
• Only a qualified person is allowed to work
on gas leading screw fittings.
• Change over to liquefied petroleum gas:
Affix adhesive label corresponding to noz-
zle set at type plate.
• Change back to natural gas: Reseal full
burning nozzle, small burning adjusting
nozzle and initial air screw.
Defect:
• Close all regulators on the device. Close
main gas tap. For all kind of repairs charge
Electrolux customer service or other ex-
perts.
• To avoid dangers, let have defective mains
cable replaced only by customer service.
• Do not open housing (except oven door
and lower flap).
• Do not use the appliance if warning lamp
operates. It shows breakdown of the oven
cooling system. Turn off the appliance im-
mediately! Call service.
Service/Maintenance:
• Close all regulators on the device. Close
main gas tap. For all kind of repairs charge
Electrolux customer service or other ex-
perts.
• Before replacing the oven lamp disconnect
device from mains, unplug mains plug or
interrupt mains fuse.
• Do not clean device with steam or high-
pressure device. Do not use combustible
cleaning agents.
• Do not insert objects into the device
through the ventilating slots.
Spare parts:
• Use only genuine spare part and accesso-
ries.
4
electrolux