www.electrolux.com
16
MAINTENANCE, CONTINUED
ENGLISH
How to maintain
brushroll
• Turn off vacuum and unplug power cord.
• Release handle and lay vacuum
face-down. Use scissors to clip hair or
threads (Fig. 1).
If necessary, loosen brushroll to
clear larger obstructions:
• Using flat-head screwdriver or coin, turn
3 tabs a quarter turn to ‘unlock’ position
(Fig. 2).
• Lift off brushroll cover (Fig. 3).
• Lift up brushroll end opposite belt and use
scissors or fingers as needed to clear
obstruction (Fig. 4).
• Place brushroll back into position,
aligning hexagon ends into housing
(Fig. 4 detail). Make sure belt is properly
attached.
• Reposition brushroll cover, aligning 3
notches at base (Fig. 5). Press cover into
place and turn 3 tabs to ‘lock’ position.
NOTE: Make sure front of cover is
secure to base. Do not overturn the
locking screws; they only require a
quarter turn to lock.
1
2
3
5
4
