Electrolux EKK615, User Manual

Page: 26 / 36

Problem Possible cause Remedy
The display shows an error
code that is not in this ta‐
ble.
There is an electrical fault. Deactivate the oven with
the house fuse or the safe‐
ty switch in the fuse box
and activate it again.
If the display shows the er‐
ror code again, contact the
Customer Care Depart‐
ment.
The display shows "12.00". There was a power cut. Reset the clock.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. INSTALLATION
WARNING!
Refer to Safety chapters.
14.1 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
Keep a distance of about 1
cm between the appliance
and the back wall to make
sure that the lid opens.
For minimal distances for fitting check
the table.
A
C
B
Minimum distances
Dimension mm
A 400
B 650
C 150
www.electrolux.com 26