4
4
5
5
6
12.5 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate the
appliance.
The appliance is not con‐
nected to an electrical sup‐
ply or it is connected incor‐
rectly.
Check if the appliance is
correctly connected to the
electrical supply.
You cannot activate or op‐
erate the hob.
The oven does not heat
up.
The fuse is released.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.
The oven / hob display
shows an error code that is
not in this table.
There is an electrical fault. Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again.
If the display shows the er‐
ror code again, contact the
Customer Care Depart‐
ment.
www.electrolux.com
24
Summary of Contents for EKK615
Page 1: ...EKK615 EN Cooker User Manual ...
Page 33: ...ENGLISH 33 ...
Page 34: ...www electrolux com 34 ...
Page 35: ...ENGLISH 35 ...