Problem
Possible cause
Remedy
The flame colour is orange
or yellow.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
The oven does not heat
up.
The oven is deactivated.
Activate the oven.
The lamp does not oper‐
ate.
The lamp is defective.
Replace the lamp.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
The oven does not heat
up.
The clock is not set.
Set the clock.
The oven does not heat
up.
The necessary settings are
not set.
Make sure that the settings
are correct.
Turnspits do not rotate.
There is too much food on
the spits.
Check the maximum
weight per each spit. Refer
to "Oven - Hints and tips"
chapter, Cooking tables.
Turnspits do not rotate.
Connection spit is not in‐
stalled properly.
Make sure that the shelf is
pushed till the end and the
connection spit is not pro‐
truding from its hole.
It takes too long to cook
the dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
The display shows an error
code that is not in this ta‐
ble.
There is an electrical fault. Deactivate the oven with
the house fuse or the safe‐
ty switch in the fuse box
and activate it again.
If the display shows the er‐
ror code again, contact the
Customer Care Depart‐
ment.
The display shows "12.00". There was a power cut.
Reset the clock.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
ENGLISH
25
