• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause a damage to the
nonstick coating.
9.1
Catalytic walls
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects
on walls while the appliance operates.
To support this self-cleaning process
heat the appliance without any food
regularly:
• Turn the lamp on.
• Remove accessories from the appli-
ance.
• Clean the oven floor with warm water
and washing up liquid, then dry it.
• Set the function.
• Set the oven temperature to 250 °C
and let appliance operate for 1 hour.
• Clean the cavity with a soft and damp
sponge.
WARNING!
Do not attempt to clean catalytic
surface with oven sprays, abrasive
cleaners, soap or other cleaning
agents. This will damage the cata-
lytic surface.
Spots or discolouration of the cat-
alytic surface have no effect on
the catalytic properties.
9.2
Shelf supports
Removing the shelf supports
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
1
2
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
9.3
Removing / inserting the
door
To clean the door remove it.
22 www.electrolux.com
Summary of Contents for EHL2X
Page 1: ...EHL2X EN OVEN USER MANUAL ...
