42
Technical Specifications
Model
EFC 6940
EFC 1410
Dimensions (cm) Height
70-113 (Filter version 78-122)
66-112 (Filter version 75,5-122)
Width
89,8 (59,8 with vapour screen
85-105
SM 8060 or SM 8062)
Depth
50
50,3
Lighting
2 x 20 W
2 x 20 W
Grease filter
1
1
power absorption
210 W
210 W
Electrical connection
220 - 240 V
230 V
We reserve the right to generate constructive and chromatic modifications as required by technological growth.
Special accessories
Charcoal filter KF20
942 120 600
Model EFC 6940 only
Remote control RM 8700
942 120 658
Vapour screen
see page 63
What to do if
If your appliance fails to work properly please carry out the following checks.
Symptom
Solution
The cooker hood will not start...
Check that: The hood is connected to the electricity supply.
Check that a fan speed has been selected
The cooker hood is not working
Check that: The fan speed is set high enough for the task.
The grease filters are clean.
The kitchen is adequately vented to allow the entry of fresh air.
If set up for recirculation, check that the charcoal filter is still effective.
If set up for extraction, check that the ducting and outlets are not blocked.
The cooker hood has
The safety cut-out device has been tripped.
switched off during operation...
Turn off the hob and then wait for the device to reset.
If the hood has been installed below the heights indicated in the
installation instructions the motor will cut-out frequently which will
damage the hood.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and
serial number.
Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
