Warning!
Do not use standard bulbs!
These develop too much heat and may
damage the appliance!
Before replacing the bulb, disconnect
the mains plug; with a permanent con-
nection: fully unscrew or deactivate the
fuse.
1. Unscrew cover above the bulb (this can
be found directly behind the loading
aperture, at the top; refer to "Descrip-
tion of machine" section.)
2. Replace defective bulb.
3. Screw cover back down.
Check the correct positioning of o-ring gas-
ket before screwing back the door light
cover. Do not operate the dryer when miss-
ing o-ring gasket on door light cover.
Warning!
For safety reasons, the cover
must be screwed down tightly. If this is
not done, the dryer must not be
operated.
TECHNICAL DATA
height x width x depth
85 x 60 x 58 cm
drum volume
108 l
depth with the load door opened
109 cm
adjustable height
1.5 cm
the appliance weight
40,5 kg
maximum load volume
8
kg
voltage
230 V
necessary fuse
10 A
total power
2350 W
energy efficiency class
B
energy consumption kWh/cycle
1)
4,48
kWh
annual energy consumption
285,5 kWh
type of use
Domestic
permitted ambient temperature
+ 5°C to + 35°C
1) 8 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121
MACHINE SETTINGS
Setting
Implementation
Buzzer permanent
on/off
The alarm is by default always off. To set permanent alarm on (off):
1. Turn the programme selector to any programme.
2. Press simultaneously the Buzzer and Dryness buttons and hold down
for approx. 5 seconds.
electrolux
13