Electrolux E9TB1-90BP, Manual, Page: 13 / 68

13 www.electrolux.com www.electrolux.com
CNT
KR
ID
TH
VN
EN
CNS
ITEM SYMPTOM CAUSE SOLUTION INDICATION
2
The motor stalls
during operation
The jug or lid is
removed during
operation.
The jug and lid should be
always mounted during
operation
Mount and place jug and
lid correctly on appliance
to continue usage
The motor stops
running
a. All LEDs start
pulsing for 3 seconds
and then goes to
ON_IDLE.
B. The UI continues to
be in PAUSED state
Overheat protection
If the motor stalls, turn off
the blender immediately,
unplug the appliance and
let it cool for at least 10
minutes before plugging
back and turning on.
The appliance turns
off and no LEDs
indicators are on
Ingredients are too
large.
Cut all ingredients into
smaller pieces
Unplug for 10 seconds
and plug the machine to
continue use the machine
The appliance turns
off and no LEDs
indicators are on
Incorrect use of
jug/accessories or
Ingredients
Usage of jug and
accessories should match
with correct ingredients.
(Jug is used for blending
fruits and vegetables)
The appliance turns
off and no LEDs
indicators are on
Stop timer is activated
to prevent overheat Press desired icons to
continue usage
Appliance runs on
one speed, pulse or
program continuously
for 3 minutes and
stops
All LEDs (except
Wi-Fi) start pulsing for
3 seconds and then
goes to ON_IDLE
3
Grinder jar
leakage
Removing grinder from
appliance by turning
glass Jar instead of
the blade assembly
holder anti-clockwise
may loosen glass jar
and cause content to
leak out.
Turn glass jar clockwise
till tight on the blade
assembly holder before
mounting on appliance
Turn ONLY the blade
assembly holder anti-
clockwise to unmount from
appliance
Do not turn glass jar to
unmount
Content leaking out
of glass jar when
unmounting from
appliance